柠檬观看下载安装
ADD:Sanxing Economic-developing Zone,Jinfeng Town, Zhangjiagang City,Jiangsu Province,China.
TEL:+0086-512-58578986
   0086-18906248978
   0086-13584457199
   0086-13915460936
FAX:+86-512-58535299
EMAIL:liqin.cn@163.com
      liqin@subculturearts.net
      xiaodong.wang@subculturearts.net
WEBSITE:www.subculturearts.net
PU automobiles acoustic cushion foaming line
PU automobiles acoustic cushion foaming line

It is hydraulic driven and by PLC control. The mold can be used for automobiles anacoustic cushion parts foaming production.

PU automobiles anacoustic cushion foaming line is special designed for automobiles anacoustic cushion foaming. It consists of 1 set high-pressure foaming machine and 1 set MH200/150 PU Foaming Moulding Machine.

All the ordinal operation for foaming production (to open the mold, close the mold, lock the mold, drive the mold-plate up/down, clamping the parts, to do edge-breaking of the parts) is hydraulic/pneumatic driven and by PLC control.

 

Main Technical Parameter

* Type: HPM50/20;

* Suitable foaming system: flexible foam, integral skin foam,

* Suitable material viscosity 22 degree Centigrade:

 Polyol:    max.  3000 mPa.s,

Isocyanate: max.  1000 mPa.s

* The flow capacity ranges: 100∼950g/s,

* Mixing ratio range adjustable ~ 2-2.5:1,

* Pouring programming time: 0.50~99.99sec

 

* Mold installation board area: 2000×1450mm;

* Mold installation space height: 830mm; 

* Movable mold-plate stroke: 100 mm;

* Mold-open angle:~30°

* Hydraulic working pressure: 8~ 12MPa;

* Control voltage: AC 110V/DC24V